Principle: EMCO Meter Run type CompaQ is used as primary element in flow measurement of liquid, gas and steam according to the differential pressure principle.
The differential pressure transmitter and 3 way manifold valve is mounted directly on the CompaQ ensuring an faster and more safe installation on site.
DN |
Inches |
Total length (mm) |
Total length (mm) |
Total length (mm) |
---|---|---|---|---|
10
|
3/8”
|
400 mm
|
400 mm
|
400 mm
|
15
|
½”
|
550 mm
|
550 mm
|
550 mm
|
20
|
¾”
|
700 mm
|
700 mm
|
700 mm
|
25
|
1”
|
900 mm
|
900 mm
|
900 mm
|
32
|
1 ¼”
|
1100 mm
|
1100 mm
|
1100 mm
|
40
|
1 ½”
|
1300 mm
|
1300 mm
|
1300 mm
|
50
|
2”
|
1500 mm
|
1500 mm
|
1500 mm
|
65
|
2 ½”
|
1600 mm
|
1600 mm
|
1600 mm
|
80
|
3”
|
1800 mm
|
1800 mm
|
1800 mm
|
100
|
4”
|
2200 mm
|
2200 mm
|
2200 mm
|
Proin at congue orci, nec porta est. Curabitur accumsan est leo, eu aliquet mi facilisis nec. Sed interdum auctor dui quis vestibulum. Mauris dignissim ante et magna gravida, vitae ullamcorper orci placerat. Aenean at tincidunt ex. Cras dapibus tortor vel quam tincidunt vestibulum. Sed metus ex, ultricies vel elementum ac, fermentum pharetra metus. Nulla sit amet nisi lorem. Fusce tempus convallis massa. Sed viverra ultricies sollicitudin. Mauris quis felis sed augue condimentum ornare.
Aenean leo elit, venenatis sed blandit eu, interdum et libero. In porttitor blandit neque, quis consectetur mi sollicitudin eget.
Morbi egestas, nunc in interdum tincidunt, tortor mi cursus turpis, consectetur tempor mi lorem eget felis. In aliquam, justo nec hendrerit bibendum, massa enim sodales erat, vel tincidunt sem erat eget nibh. Fusce semper non mi id placerat.
Nunc ornare non orci in pretium. Donec enim turpis, faucibus id enim eu, facilisis ultricies ante. Fusce metus lectus, vestibulum sit amet vestibulum in, varius et metus. Suspendisse sed mauris dictum, vulputate dolor et, congue massa. Nulla ac mollis nibh, non ullamcorper augue. Fusce bibendum ullamcorper arcu et vestibulum.
The FLEMCO flow meter can be mounted in a horizontal or vertical pipe. For liquid flow in a horizontal pipe the electronics shall be mounted below the pipe.
For gas flow in a horizontal pipe the electronics shall be mounted
above the pipe. To insure high accuracy of measurement, long straight pipe runs upstream from the flow meter is necessary. The required straight pipe run depends on the disturbance upstream. To maintain the 1% accuracy the minimum straight pipe run upstream shall be 14 x inner pipe diameter and 6 x downstream
If an additional inaccuracy of ½ % is acceptable the required straight pipe runs are reduced to half of the above values.
DN |
Inches |
Total length |
---|---|---|
10
|
3/8”
|
400 mm
|
15
|
½”
|
550 mm
|
20
|
¾”
|
700 mm
|
DN |
Inches |
Total length (mm) |
---|---|---|
10
|
3/8”
|
400 mm
|
15
|
½”
|
550 mm
|
20
|
¾”
|
700 mm
|
25
|
1”
|
900 mm
|
32
|
1 ¼”
|
1100 mm
|
40
|
1 ½”
|
1300 mm
|
50
|
2”
|
1500 mm
|
65
|
2 ½”
|
1600 mm
|
80
|
3”
|
1800 mm
|
100
|
4”
|
2200 mm
|
M96
1100*550 mm
1000 Sets/Year
15 m/min
Design and calculation standards
|
ISO/TR 15377, ISO 5167, BS 1042, ASME MFC-14M, MFC-3M, DIN 19205, Shell Flow Meter Engineering Handbook
|
Sizes
|
DN 10 – DN 100, 3/8” - 4"
|
Pressure rating
|
PN 10 - 400, 150 - 2500 lbs
|
Plate thickness
|
3 mm
|
β (d/D)
|
preferred range 0,5 < β < 0,7 for highest accuracy.
|
Vent or drain hole
|
Not recommended
|
Material
|
AISI 316, other on request
|
Pipe run
|
Can be honed for increased accuracy
|
Pressure taps
|
Transmitter flanges with a 54 mm centre distance
|
Connection
|
Flanges with flat or raised face or groove according to DIN 2526, 2513 or 2512, or RF and RTJ according to ANSI B 16.5
|
Orifice plate shapes
|
Square edge concentric, conical, 1/4 circle, segment
|
Marking
|
The carrier rings are marked with "+" and "-" and flow direction
|
Accuracy
|
+/- 0,75 - 1 %(square edge plate), +/- 2 %(conical), +/- 2 - 2,5%(¼ circle)
|
Pressure loss
|
Depending on β, for β equal to 0,6 : ca. 60 % of the differential pressure measured
|
Limits for Reynolds No
|
Re > 1260 x β2 D according to ISO 5167 1000 < Re < 108 according to ASME MFC-14M
|
Accessories |
|
---|---|
3 valve manifold, double flanged
|
|
Condensing chamber unit for steam flow (only horizontal pipe line)
|
M96
3.60*1.80 ft
1000 Sets/Year
49.21 ft/min
Product Parameter |
|
---|---|
Travel
|
X, Y, X Axis
|
Max. Load of table
|
1322.77 Lb
|
Beam MLD
|
30.57 ft
|
Depth MLD
|
15.41 ft
|
Draught Summer
|
5.9 ft
|
Equipment |
|
---|---|
Main Generator Sets
|
4x CAT 3412C TA, each 500 ekW at 1500rpm
|
Emerg/Harbour Gen set
|
1x CAT 3406C TA, 215 ekW at 1500rpm
|
Standard Accesories |
|
---|---|
Controller system
|
Pneumatic system
|
Full enclosed cover
|
RS 232 Interface
|
Spindle encoder position system
|
Operation unit
|
Three axis inner encoder feedback system
|
Working light
|
Auto lubrication system
|
Tool and tool box
|
Optional Accesories |
|
---|---|
Siemens controller or other controller system
|
Screw type auto conveyor
|
Spindle oil coolant
|
Chain type tool magazine
|
Umbrella type tool magazine
|
4 Axis rotary table
|
Arm type tool magazine
|
Ring spray spindle
|
Cookie | Duration | Description |
---|---|---|
cookielawinfo-checkbox-advertisement | 1 year | Set by the GDPR Cookie Consent plugin, this cookie is used to record the user consent for the cookies in the "Advertisement" category . |
cookielawinfo-checkbox-analytics | 11 months | This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Analytics". |
cookielawinfo-checkbox-functional | 11 months | The cookie is set by GDPR cookie consent to record the user consent for the cookies in the category "Functional". |
cookielawinfo-checkbox-necessary | 11 months | This cookie is set by GDPR Cookie Consent plugin. The cookies is used to store the user consent for the cookies in the category "Necessary". |
cookielawinfo-checkbox-others | 11 months | This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Other. |
cookielawinfo-checkbox-performance | 11 months | This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Performance". |
elementor | never | This cookie is used by the website's WordPress theme. It allows the website owner to implement or change the website's content in real-time. |
viewed_cookie_policy | 11 months | The cookie is set by the GDPR Cookie Consent plugin and is used to store whether or not user has consented to the use of cookies. It does not store any personal data. |
Cookie | Duration | Description |
---|---|---|
_ga | 2 years | The _ga cookie, installed by Google Analytics, calculates visitor, session and campaign data and also keeps track of site usage for the site's analytics report. The cookie stores information anonymously and assigns a randomly generated number to recognize unique visitors. |
_ga_* | 1 year 1 month 4 days | Google Analytics sets this cookie to store and count page views. |
_gat_UA-* | 1 minute | Google Analytics sets this cookie for user behaviour tracking. |
_gat_UA-151202324-1 | 1 minute | A variation of the _gat cookie set by Google Analytics and Google Tag Manager to allow website owners to track visitor behaviour and measure site performance. The pattern element in the name contains the unique identity number of the account or website it relates to. |
_gid | 1 day | Installed by Google Analytics, _gid cookie stores information on how visitors use a website, while also creating an analytics report of the website's performance. Some of the data that are collected include the number of visitors, their source, and the pages they visit anonymously. |
CONSENT | 2 years | YouTube sets this cookie via embedded YouTube videos and registers anonymous statistical data. |
VISITOR_INFO1_LIVE | 5 months 27 days | YouTube sets this cookie to measure bandwidth, determining whether the user gets the new or old player interface. |
YSC | session | Youtube sets this cookie to track the views of embedded videos on Youtube pages. |
yt-remote-connected-devices | never | YouTube sets this cookie to store the user's video preferences using embedded YouTube videos. |
yt-remote-device-id | never | YouTube sets this cookie to store the user's video preferences using embedded YouTube videos. |
yt.innertube::nextId | never | YouTube sets this cookie to register a unique ID to store data on what videos from YouTube the user has seen. |
yt.innertube::requests | never | YouTube sets this cookie to register a unique ID to store data on what videos from YouTube the user has seen. |